For CNC plasma shops
From design to steel plate,
with no parts falling off.
Upload your logo or drawing and the system calculates the bridges so no inner part falls off, compensates the kerf and places the pierces off the part. You get machine-ready G-code.
The preview is free. You only pay when you download the file.
It's this easy
Four steps, under a minute. No drawing bridges by hand, no fighting with the CAM.
Why use it
Hours of work in seconds
What takes an afternoon of nodes and bridges in Corel is done in seconds and ready to cut.
Nothing falls off
It finds every inner part that would come loose and ties it back to the plate, with several bridges on large parts.
Clean stencil-style lettering
Bridges centered on each letter's axis, even on arched text. Same letter, same bridge.
No marks on your part
It pierces in the scrap and leads into the contour. The torch runs on the scrap side, half a kerf away.
G-code for every machine
Editable profiles: Z-axis torch (ArtCAM style), Mach3, Chinese controllers, GRBL or your own format.
Instant quotes
Cut length, number of pierces and estimated time for every design before cutting.
Hand touch-ups
Brush, eraser, add or remove bridges, with mouse and keyboard shortcuts. Everything is saved.
From photos or color logos
Flatten by brightness or by color with an eyedropper, plus smoothing to clean up noisy images.
A real example
Drag the slider to compare the original design with the plate ready to cut. In orange, the bridges added by the system.
The torch never pierces on the part
Every pierce happens in the scrap and leads into the contour (in green). The torch runs on the scrap side, half a kerf from the edge, so the part comes out true to size and without marks.
- Cut length and number of pierces for quoting
- Warnings for metal that is too thin and cuts narrower than the kerf
- Several machine profiles: Z axis (ArtCAM style), Mach3, Chinese controllers, GRBL or custom
- Also exports DXF and SVG in millimeters
Pricing
1 credit = 1 design. Once paid, it stays unlocked for 30 days: download it in every format and for every machine, and adjust it at no extra cost.
Pay with MercadoPago, PayPal or bank transfer. Sign up and get 45 free credits to try it.
FAQ
Which files can I upload?
PNG, JPG, WEBP, GIF or SVG (for example, exported from Corel). If the SVG includes its size in millimeters, it is used automatically. Photos and color logos work too: they are flattened by brightness or by color.
Does it work with my machine?
G-code is produced through editable profiles. There are ready-made profiles for Z-axis torch (ArtCAM style), Mach3, Chinese controllers (F2100, Fangling, Start) and GRBL, and you can create your own by copying the format of an .nc file that already works. You can also download DXF or SVG for any CAM.
Do I have to pay to try it?
No. You can load a design and see the bridges, the toolpath and the cut estimate for free. A credit is only used when you download the file, and that design stays unlocked for 30 days.
Can I adjust the bridges?
Yes: add or remove bridges, paint metal or cut by hand with the brush, discard parts and undo. Edits are saved so you can pick up later.
Who is responsible for the cut?
The service generates the file from what you upload; reviewing and using it is the user's responsibility. See the disclaimer.